Troubleshooting & Fault Codes
- Troubleshooting Articles
- 'P' Flashes in the Display When you are Trying to Set PowerBoost
- Cooktop Makes a Low Humming Noise when used on a High Heat Setting (Especially PowerBoost)
- Cooktop or Cooking Zone has Turned Itself Off Unexpectedly, a Tone Sounds & an Error Code is Displayed (typically E or Er alternating with one or two digits in the cooking zone displays)
- Extraction Performance has Decreased
- I have Locked the Control Panel While Two Cooking Zones are Bridged & the Cooktop has Not Turned Off
- Pans do Not Become Hot. The Heat Setting Display Comes On, but the U Does Not Flash when I Remove a Pan. -0- Shows in the Timer Display when I Turn On the Cooktop
- Pans Do Not Become Hot & 'U' Appears in the Display
- Some or All Displays Flash an Image & There is a Continuous Beep
- Some Pans Make Crackling or Clicking Noises
- The Cooktop Cannot be Turned On
- The Glass is Being Scratched
- The Touch Controls are Difficult to Operate
- Touch Controls are Unresponsive