Skip to main content
Fisher & Paykel Product Help

Flush Mounting Installation (optional)

Another option for Installation is Flush Mounting.

 

IMPORTANT!

Refer to the NOTE in ‘Before you install the appliance’ in the Safety and Warnings section before you flush mount this appliance.

Screen Shot 2018-01-05 at 10.29.57 AM.png                                    Screen Shot 2018-01-05 at 10.30.30 AM.png

Screen Shot 2018-01-05 at 10.30.50 AM.png                                             Screen Shot 2018-01-05 at 10.31.07 AM.png    Screen Shot 2018-01-05 at 10.31.21 AM.png

 

Product and Cabinetry Dimensions

Inches (mm)

A. Overall height of product (excluding burners, dials and pan supports) 3 1/8” (80)
B. Overall width of product 35 1/2” (900)
C. Overall depth of product 20 7/8” (530)
D. Height of chassis (below top of counter) 3 1/16” (77)
E. Width of chassis 33 13/16” (859)
F. Depth of chassis 19 3/16” (487)
G. Overall width of routered recess 35 5/8” (905)
GI. Width of cutout 34 1/4” (870)
H. Overall depth of routered recess 21 1/16” (535)
HI. Depth of cutout 19 7/16” (494)
I. Corner radius of cutout max. 3/8” (10)
J. Corner radius of routered recess max. 3/16” (5)
K. Height of routered recess 1/8” (3)
L. Distance from top of counter to center of gas inlet on product 2 13/16” (71)
M. Distance from edge of chassis to gas inlet on product 7/8” (22)

N. Minimum clearance below top of benchtop to:

      Rear top of oven* installed below cooktop or cabinetry
      Thermal protection barrier

 

3 1/2” (89)
3 1/2” (89)

 

Router the Countertop to the Specified Depth
Screen Shot 2018-01-05 at 10.44.36 AM.png

Fit the Clamping Brackets
Screen Shot 2018-01-05 at 10.44.58 AM.png

Mask Off the Area to be Siliconed
Screen Shot 2018-01-05 at 10.45.19 AM.png

Apply Silicone
Screen Shot 2018-01-05 at 10.46.02 AM.png

Wipe off Excess Silicone
Screen Shot 2018-01-05 at 10.46.18 AM.png

If Removing Product, Cut Around the Silicone
Screen Shot 2018-01-05 at 10.46.36 AM.png

  • Was this article helpful?