Skip to main content
Fisher & Paykel Product Help

Final Checklist

Lists the final checklist to be completed by the installer to verify safety and an optimal user experience, as well as how to test the operation of your cooktop.

To be completed by the Installer

  • Have you installed the clamping brackets?
  • Have you verified that the type of model (factory-set for NG or LP) matches the type of gas at the site of installation?
  • Have you sealed all connections with gas tape?
  • Have you used the fibre washer supplied?
  • Have you leak-tested all connections?
  • Is the cooktop set to the correct working pressure?
  • Have you affixed the supplied duplicate data plate label on an adjacent surface accessible to the customer?
  • Is the cooktop grounded?
  • Check that the power supply cord is NOT touching the cooktop.


  • Do all burners ignite both individually and in combination?
  • Are the flames consistent and appropriately sized?
  • Have you demonstrated the basic operation to the customer?
  • Was this article helpful?