Skip to main content
Fisher & Paykel Product Help

Leak Testing

Testing for leaks in ignition system.
  • To check that the ignition system operates correctly, light each burner by itself, then all burners in combination.
  • Check for a well-defined blue flame without any yellow tipping.
  • If any abnormality is evident, check that the components of the burner assembly are located properly.
  • If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorized Service Center.
  • The cooktop must not be used by the customer until proper operation has been achieved.

 Screen Shot 2018-01-08 at 12.56.03 PM.png

  • Was this article helpful?