Skip to main content
Fisher & Paykel Product Help

Reset the Minimum (Low) Setting - All Other Burners

Resetting minimum setting on rest of the burners.
  1. Light the burner and set the dial to the minimum (LO) setting. 
  2. Remove dial. 
  3. Insert a Flathead screwdriver into the dial spindle. 
  4. Rotate the screw slowly until a minimum regular flame is achieved.
  5. Replace the dials.
  6. Check regulation.
  • Quickly turn down the flame from maximum to minimum setting. It must not go out. Re-adjust the setting if required by repeating steps 1-4.

Repeat for each burner.

  • Was this article helpful?