Skip to main content
Fisher & Paykel Product Help

Installation Instructions

Instructions for Installing the Altitude Conversion Kit.

Altitude Conversion Kit: CG365D, CG305D & CG244D models.

Before you begin, read all instructions. 

This conversion kit must be installed by a qualified installer or service agency in accordance with the manufacturer’s instructions. All applicable codes and requirements of the authority having jurisdiction must be followed. The qualified installer or service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions. 

This conversion kit is for altitude conversion only. 

Parts in included: Qty
Orifices: 7
Conversion label: 1

Tools required: 
¼” (7mm) Ring spanner
¼” (7mm) Box Spanner 

CG305D & CG365D
Kit number
Orifice size (mm)
  Auxiliary Semi-rapid rapid Dual Wok
534695 Kit Hi Alt NG
(3,000-6,000’)
0.85 1.35 1.60 0.70
1.43
1.43
534697 KIT HI ALT LP
(3,000-6,000’)
0.80 1.30 1.55 0.70
1.30
1.30
534696 KIT HI ALT NG
(6,000’+)
0.50 0.70 0.92 0.50
0.80
0.80
534698 KIT HI ALT LP
(6,000’+)
0.50 0.65 0.90 0.50
0.76
0.66

  

CG244D 
Kit number
Orifice size (mm)
  Auxiliary Semi-rapid Mini Wok
535432 KIT HI ALT
3000-6000 NG
0.87 1.35 1.50
535434 KIT HI ALT
3000-6000 LG
0.50 0.70 0.91
535433 KIT HI ALT
6000+ NG
0.85 1.30 1.50
535435 KIT HI ALT
6000+ LG
0.50 0.70 0.91

 Auxiliary, semi-rapid and rapid burners: 

  1. Remove pan supports and burners.
  2. Using the box spanner replace orifices with those supplied (see table above).

Dual Wok Burner: 


This burner has 3 orifices. 

  1. Using the box spanner replace the main (inner) orifice.
  2. Using the ring spanner replace the two outer orifices.
  3. Replace the burner and pan supports.

Complete the conversion label and attach to the rating plate label on the underside of the product.