Skip to main content
Fisher & Paykel Product Help

Clearance Dimensions

Details the various clearance dimensions of your cooktop.
Screen Shot 2018-01-04 at 5.36.44 PM.png Screen Shot 2018-01-04 at 5.36.50 PM.png
Front

 

Clearance Dimensions CG244D
Inches (mm)
CG305D
Inches (mm)
CG365D
Inches (mm)
A. Minimum clearance from left edge of product to nearest vertical surface 12” (294) 12” (294) 12” (294)
B. Minimum clearance from right edge of product to nearest vertical surface 12” (294) 12” (294) 12” (294)
C. Minimum clearance from rear edge of product to:
        Nearest combustible surface
        Nearest non-combustible surface*

3” (74)

1 1/2” (38)

7” (178)

1 1/2” (38)

7” (178)

1 1/2” (38)

D. Minimum clearance from front edge of counter to front edge of product 1 1/4” (32) 1 1/4” (32) 1 1/4” (32)

E. Minimum clearance from cooking surface to combustible surface centered      above the cooking surface

30” (762) 30” (762) 30” (762)
F. Maximum overall depth of overhead cabinetry 13” (330) 13” (330) 13” (330)
G. Minimum distance between overhead cabinets installed to either side of  product 24” (588) 30” (762) 36” (915)
H.  Minimum vertical distance between counter and cabinet extending above the counter 18” (457) 18” (457) 18” (457)
I.  Minimum clearance below top of countertop to:
  • Nearest combustible surface
  • F&P oven or nearest non-combustible surface

2 3/4” (70)

2 9/16” (65)

2 3/4” (70)

2 9/16” (65)

2 3/4” (70)

2 9/16” (65)

J.  Maximum distance from the center of the product to the nearest grounded power outlet.  The power supply cable must not touch any hot metal surfaces. 35 1/2” (900) 35 1/2” (900) 35 1/2” (900)

*Recommended non-combustible materials are: 1/4” (6 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015” (0.4 mm) stainless steel, 0.024” (0.6 mm) aluminum or 0.020” (0.5 mm) copper. 

  • Was this article helpful?