Skip to main content
Fisher & Paykel Product Help

Using Your Cooktop

 

 

Using Your CT_1.PNG

CDV2-304

  1. C Burner
  2. D Burner
  3. Control Knobs

 

Burner

Max. BTU/HR

NG (Natural Gas)

Max. BTU/HR

LP (LPG Gas)

Simmer BTU/HR

NG & LP

C 15,000 12,000 1,200
D 20,000 20,000 1,200

 

Using Your CT_CDV2-365.PNG

CDV2-365

  1. C Burner
  2. D Burner
  3. Control Knobs

 

Burner

Max. BTU/HR

NG (Natural Gas)

Max. BTU/HR

LP (LPG Gas)

Simmer BTU/HR

NG & LP

C 15,000 12,000 1,200
D 20,000 20,000 1,200

 

Using Your Cooktop

Using Your CT_Burn Indicator.PNG Using Your CT_Halo.PNG
  1. Identify the knob of the burner you want to use.
  1. Press down then turn counter-clockwise to HI.
  • The ignitors start clicking as they spark.

CDV2-365H/304H models only:

  • All the halos will glow white.
  • Once the burner lights, the halo will glow orange.

 

  • If there is no clicking, there is no spark to light the burner. If the burner fails to light turn the knob back to OFF and see ‘Troubleshooting’.
Using Your CT_Hi_Sim.PNG Using Your CT_Hi_Sim#2.PNG
  1. After the burner has lit, adjust the flame anywhere between HI and SIM.
  • Do not adjust or leave the knob between HI and OFF.
  1. When you have finished cooking, turn the knob clockwise back to OFF.

CDV2-365H/304H models only:
If you have other burners on:

  • The halo will glow white.

If you don’t have any other burners on:

  • All the halos will go out.

 

  • Check that the burner has gone out.
  • Before leaving the kitchen, check that all burners have been turned off.
Turn the burner OFF and see ‘Troubleshooting’ for what to do next if you experience any of the following:
  • There’s a strong gas smell.
  • The flame has been blown out by a draft or extinguished by a spill and does not re-ignite.
  • There is no clicking/sparking or there is clicking/sparking, but a burner or burners won’t light.
  • The flames don’t burn all the way around a burner, or some flames flicker.
  • The flame is yellow or yellow-tipped rather than blue.
  • The flames are too large, small, irregular, noisy or lift away from the burner.

 

 

 

  • Was this article helpful?