Skip to main content
Fisher & Paykel Product Help

Cabinetry Dimensions – Wall Mounted (i.e Installed with a F&P Compact Oven)


Cab Dim_Wall Mount_Front.PNG


Cab Dim_Wall Mount_Side.PNG


Cab Dim_Wall Mount_Plan.PNG


Important-Icon.png In a wall mounted installation, there needs to be an 11/16” (18mm) Spacer fixed underneath the warming drawer first to raise it to the required height.
Cabinetry Dimensions Inches (mm)
M.  Minimum inside height of cavity
  • With optional Lower trim kit fitted
  • Without optional Lower trim kit fitted


23 1/4” (590)
22 1/2” (570)

N.  Inside width of cavity 22” (560)
O.  Minimum inside depth of cavity 22 1/4” (565)
Note-Icon.png When installed in combination with a companion product the companion product may be placed directly onto the warming drawer. It is not necessary to place a shelf between the products. A built-in shelf at the base of the cabinetry able to support the weight of both products is  required.

*  PO – POWER OUTLET. Ensure there is an accessible earthed power outlet within 35 7/16” (900mm) of the centre rear of the product.