Skip to main content
Fisher & Paykel Product Help

Cabinetry Dimensions – Wall Mounted (i.e Installed with a F&P Coffee Maker)



When installing under an F&P Coffee Maker you must ensure the supplied anti-tip bracket is installed, unless there is a fixed shelf above the drawer acting as an anti-tip obstacle.

Important-Icon.png If installing under the F&P Coffee Maker, ensure there is the 2” (50mm) gap at the back of the cabinet and the 7 7/8”2 (200mm2) toekick cutout required for airflow. Refer to the Coffee Maker Install instructions.


Cab Dim_Wall Mount_Front_Coffee.PNG


Cab Dim_Wall Mount_Side_Coffee.PNG


Cab Dim_Wall Mount_Plan_Coffee.PNG



In a wall mounted installation, there needs to be an 11/16" (18mm) Spacer fixed underneath the warming drawer first to raise it to the require height.

Cabinetry Dimensions Inches (mm)

M.  Minimum inside height of cavity

  • with Optional Lower Trim Kit fitted
  • without Optional Lower Trim kit fitted


23 1/4" (590)

22 1/2" (570)

N.  Inside width of cavity 22" (560)
O.  Minimum inside depth of cavity 22 1/4" (565)

* PO - POWER OUTLET.   Ensure there is an accessible earth power within 35 7/16" (900mm) of the Centre rear of the product.


When installed in combination with a companion product the companion product may be placed directly onto the warming drawer.  It is not necessary to place a shelf between the products.  A built-in shelf at the base of the cabinetry able to support the weight of both products is required.