Skip to main content
Fisher & Paykel Product Help

First Use

  1. Last updated
  2. Save as PDF

 

Your oven comes with two shelves positioned and secured inside

  • The following shows you how to remove and reposition the shelves to your preferred position
  • We recommend you then condition the oven.

First Use_Remove Packaging.PNG

Remove all cable ties and packaging holding the shelving in place

 

Remove Shelves from the Oven

  1. Remove all the shelving, taking special care with the sliding shelf (some models only).
  2. To remove a sliding shelf, grip it at the front (making sure you are gripping the wire shelf and the sliding frame together), lift upwards and pull it out of the oven.


For your safety, the wire shelves and sliding frames are built together as one unit and are not separable. When placed properly on the side racks, the slides will prevent the wire shelves from tilting when pulled towards you.

First Use_Remove Sliding Shelf.PNG

To remove the sliding shelf unit, lift up and out

 

Replace Shelving in your Preferred Positions

To replace a wire shelf:
  • Check the guard rail (as shown) to make sure the shelf is the right way up.
  • Slide it horizontally back along the side racks ensuring it is level and the stop notch is facing down.

Shelf Positions

First Use_Shelf Positions.PNG

First Use_Replace Wire Shelf.PNG

Replacing a Wire Shelf

First Use_Replace Sliding Shelf.PNG

Replacing a Sliding Shelf

To replace a full extension sliding shelf (some models only):

 

  • Position the shelf so that it is level, with the front bar toward you (as shown).
  • Check the guard rail (as shown) to ensure the shelf is the right way up.
  • Ensure the sliding frame is not extended.
  • Position the shelf on top of the side racks, so the rear shelf tag at the back of the sliding frame rests behind the side rack wire (as shown).
Important-Icon.png Ensure the sliding shelf is positioned on top of the side rack wires rather than between them.
  • Push the sliding shelf all the way to the back of the oven, until the front shelf tag drops into place behind the side rack wire.
  • We recommend placing the telescopic sliding shelf on position 2 or 4.
  • To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.

 

 The Control Panel

Note-Icon.png

Illustrative purposes only - oven function indicators may vary. 
First Use_Control Panel#1.PNG
First Use_Control Panel#2.PNG

 

Using the Touch Controls

  • Use the ball of your finger, not its tip. The controls respond to touch, so you don’t need to apply any pressure.
 First Use_Touch Controls.PNG

Locking the Control Panel

This function is to prevent accidental use of the oven (eg by children).
When locked the controls are unresponsive and the oven will not turn on.

 

  • To lock:
    • Touch and hold the select control until the indicator light comes on.
  • To unlock:
    • Touch and hold the cancel control.

 

Setting the Clock

When your oven is first turned on, or after a power cut, the display will flash . You will need to set the clock in order to use the oven.

First Use_Setting the Clock #1.PNG

1.  The display will flash 24 Hr

First Use_Setting the Clock #2.PNG

2.  Touch the right scroll control to scroll between 24 Hr and 12 Hr
3.  Touch the select Tick_Select Button for Oven.PNGcontrol to confirm.

First Use_Setting the Clock #3.PNG

4.  Touch the left and right scroll Left_Right Arrows.PNGcontrols to set the time.

First Use_Setting the Clock #4.PNG

5.  Touch the select Tick_Select Button for Oven.PNGcontrol to confirm.

  • The time set will now be steadily lit.

 

Changing the Time

You set the clock within the user preference menu.

First Use_Changing the time #1.PNG

1.  To enter the user preference menu touch and hold the left and right scroll controls together for 3 seconds.

  • Either 12 Hr or 24 Hr will be displayed.

2.  Touch the select Tick_Select Button for Oven.PNGcontrol to confirm. The display will flash.

First Use_Changing the time #2.PNG

3.  Touch the right scroll control to scroll between 24 Hr, 12 Hr or OFF to turn the display off (see ‘Setting User preferences’ for more information).
4.  Touch the select Tick_Select Button for Oven.PNGcontrol to confirm.

First Use_Changing the time #3.PNG

5.  Touch the left and right scroll Left_Right Arrows.PNG controls to set the time.
6.  Touch the select Tick_Select Button for Oven.PNGcontrol to confirm.

 

First Use

First Use_Bake Function.PNG

First Use_Temperature.PNG
  1. Select the Bake Bake Function.PNGfunction.
  • The halo will glow white.
  • Each function has a preset temperature and so the oven will start heating at the Bake preset temperature of 360oF (180oC).
  1. Set the temperature to 400oF (200oC) for 30 minutes.
  • While the oven is heating up, the temperature halo will glow red and the temperature indicator will alternately show the actual and set temperatures.
  • When the oven has reached set temperature, a tone will sound and the halo will turn white.
First Use_Bake Function.PNG First Use_Temperature#2.PNG
  1. After 30 minutes is up, select the Aero Broil Aero Broil Function.PNGfunction.
  1. Leave the temperature at 400oF (200oC) for 5 minutes.
  • The halo will remain white.
  1. Now select the True Aero Function.  Leave the temperature at 400oF (200oC) for 20 minutes.
First Use_OFF.PNG
  1. When you have finished, turn the function dial to Off OFF Function.PNG. The halos will go out.
  • There will be a distinctive smell and a small amount of smoke during the conditioning process as manufacturing residue is burnt off. This is normal, but make sure the kitchen is well ventilated during the conditioning.
  • Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.


 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Appliance
    Cook - Built-In Oven (Single)
    Article type
    Topic
    Manual
    User Guide
  2. Tags
    This page has no tags.