The meat probe is supplied with some models only. For other models it may be purchased separately. For further information or to purchase a meat probe, contact Customer Care, your authorized service centre or visit our website www.fisherpaykel.com.
Using the Meat Probe
Use your meat probe to accurately judge when your meat is perfectly cooked. You can use the probe with any function.
Double Oven Models only:
You can use the meat probe in either oven. Press the UPPER or LOWER selector button to select the oven you wish to use and then follow the steps below.
Select the oven function and temperature. Preheat the oven if appropriate.
Remember Roast and Aero Broil do not require preheating.
Insert the metal probe horizontally into the center of the thickest part of the fully defrosted meat. The thicker the meat, the longer it will take to cook, so it is important that the probe is measuring the temperature of the meat at its thickest point. Make sure the probe does not touch bone, fat or gristle, as these will heat up more quickly than the lean meat.
Place the meat in the roasting (or other suitable uncovered) dish.
When the oven has preheated (if required) to the set temperature, place the dish in the oven and insert the plug end of the meat probe into the probe socket, using an oven mitt if the oven is hot. The probe socket is on the left hand side of the oven, between shelf positions 4 and 5. Make sure the probe is pushed completely into the socket, then close the oven door.
4a. Press the right scroll button 4 times and the meat probe indicator will come on and the display will show 148.
4b. Press the select button to confirm. The display will then flash 148.
5. Use the scroll buttons to set the required meat temperature (eg 167oF / 75oC).
6. Press Select to confirm:
7a. When the preset temperature is reached:
7b. Press the cancel button to cancel the tone.
Tips for Using the Meat Probe
- You can still use the timer when the meat probe is in use.
- You cannot use the meat probe with Automatic cooking.
- The internal temperature of the meat will continue to rise by 35-45°F / 2-8°C after you have removed it from the oven, so allow for this in your calculations. Cover with foil and let it rest for 15 to 20 minutes.
- If you wish to remove the meat from the oven (eg basting), unplug the meat probe from the socket but do not remove it from the meat. The display will show -- . When you are ready to resume cooking, re-insert the probe plug into the socket and the display will will alternate between the preset and current internal temperature of the meat.
- Use only the meat probe supplied with your oven, purchased from your Fisher & Paykel dealer or replaced under warranty by your nearest Fisher & Paykel Authorized Repairer.
- Hold the meat probe at the handle when inserting and removing it from food and the meat probe socket.
- Remember to remove the meat probe from the oven before you start a self-clean cycle.
- Do not store the probe in the oven.
- Only use the probe with fully defrosted food.
- Wash+ the meat probe in mild soapy water but do not immerse. It is NOT dishwasher safe.