Skip to main content
Fisher & Paykel Product Help

How to Use the Electronic Program

 

The electronic programmer is a device which groups together the following functions:

  • 12 hours clock with illuminated display (P on the display for PM time indication).
  • Timer (up to 23 hours and 59 minutes).
  • Program for semi-automatic oven cooking.
  • Program for automatic oven cooking.
  • Management of the cooking functions. The programmer can manage setting the temperature in the various cooking functions.
  • Management of the self cleaning function.

Description of the Push Buttons:

Screen Shot 2018-01-04 at 3.43.45 PM.png

Timer (1)


Screen Shot 2018-01-04 at 3.49.19 PM.png
Fig. 3.1
Screen Shot 2018-01-04 at 3.44.09 PM.png

Cooking time or self cleaning time (2)

Screen Shot 2018-01-04 at 3.44.41 PM.png

End of cooking time or allowance to start self cleaning cycle (3)

Screen Shot 2018-01-04 at 3.45.15 PM.png

Setting oven temperature (4)


Screen Shot 2018-01-04 at 3.45.34 PM.png

Countdown of the figures of all the functions or of the temperature to be set-(5)

Screen Shot 2018-01-04 at 3.46.11 PM.png

Advance of the figures of all the functions or of the temperature to be set (6).

Description of the Light Symbols:


Screen Shot 2018-01-04 at 3.56.28 PM.png

Indicates that a program has been set

Screen Shot 2018-01-04 at 3.56.56 PM.png

Indicates that the heating elements are working

Screen Shot 2018-01-04 at 3.57.12 PM.png

Indicates that the timer is working


Screen Shot 2018-01-04 at 3.57.46 PM.png

Indicates PM time

Switching ON for the First Time or After a Black-Out

  • After the appliance has been connected to the mains or after there has been a black-out the programmer must be activated so that it can work. 12:00 flashes on the display.
  • Press keys 2 and 3 at the same time. The programmer starts to work.

Screen Shot 2018-01-04 at 4.00.33 PM.png

Setting the Time

The programmer has an electronic clock (12 hours) with luminous figures which indicate hours and minutes.

Setting the clock will zero any program in progress or set.
  1. Press pushbuttons 2 and 3 at the same time.

  2. Press pushbuttons 5 or 6 until the exact time is set. During this phase the dot between hours and minutes will flash on the display. If the plus or minus keys are kept pressed for a few seconds, the figures will scroll more quickly.

    P on the display indicates PM time.


Screen Shot 2018-01-04 at 4.03.23 PM.png

Audible Signal

The intermittent audible signal, duration 30 seconds, sounds when the timer or semi-automatic or automatic cooking have reached the end of the time set. It also sounds to signal that the door is open (see oven use chapters).

To silence the audible signal press any of the programmer keys.

Timer

Screen Shot 2018-01-04 at 4.07.17 PM.png

The timer function is only used to count the time and does not influence oven operation or any program which are in progress or set.

  1. Press push button 1. The bell symbol will start to flash.
  2. Press keys 5 or 6 to set the time required.
  3. The countdown starts immediately. The bell symbol stops flashing and the time appears again.
  4. To see the countdown press push button 1. The time will be indicated in hours and minutes; the seconds are only indicated for the last minute.
  5. At the end of the countdown an audible signal sounds and the bell symbol on the display flashes.

    Press any push button to stop the audible signal.

This function is only an electronic alarm and does not switch OFF the oven. Remember to turn OFF manually the selector knob at the end of the countdown.

Semi-Automatic Cooking

Start immediate cooking and switch the oven off automatically after the programmed cooking time.

Setting


Screen Shot 2018-01-04 at 4.19.37 PM.png
  1. Set the cooking function by turning the oven selector to the function required.
  2. The cooking temperature appears on the display. To change it proceed as described in the “Setting the cooking” section.
  3. Press push button 2. AUTO starts to flash and 0.00 appears.
  4. Press push buttons 5 or 6 to set the cooking time (cooking time in hours and minutes: set it to ten minutes less than the time required because the stored heat will complete the cooking).
  5. On the display AUTO becomes steady and the cooking program starts.

During Cooking


Screen Shot 2018-01-04 at 4.21.58 PM.png
  1. During the cooking cycle, the display shows the oven temperature measured by the probe or pre-set temperature.
    Press key 2 to display the time remaining until the end of cooking.
    The cooking time and temperature can be varied at any time, as described above.

At the End of Cooking


Screen Shot 2018-01-04 at 4.25.26 PM.png
  1. End appears on the display, AUTO flashes and the audible signal sounds.
  2. The cooking cycle has finished and the oven is OFF.
  3. Press any program push button to stop the audible signal.
  4. OFF appears (oven OFF).
  5. Turn the function selector to 0 (OFF).
  6. The program display shows the time.
At the end of the program always turn the function selector knob
to 0 (OFF).

Automatic Cooking

Start cooking at the programmed time and switch the oven off automatically after the programmed cooking time.

Setting

  1. Set the cooking function by turning the oven selector to the function required.


Screen Shot 2018-01-04 at 4.34.48 PM.png
  1. The cooking temperature appears on the display. To change it proceed as described in the Setting the cooking section.


Screen Shot 2018-01-04 at 4.35.27 PM.png
  1. Press push button 2. AUTO starts to flash and 0.00 appears.

  2. Press push buttons 5 or 6 to set the cooking time (cooking time in hours and minutes: set it to ten minutes less than the time required because the stored heat will complete the cooking).

  3. On the display AUTO becomes steady and the cooking program starts.


Screen Shot 2018-01-04 at 4.36.08 PM.png
  1. Press push button 3 (AUTO starts to flash).

  2. Press push buttons 5 or 6 to set the time when the cooking should finish. The values set must be correct; e.g. if it is 08:00 a cooking time of 3 hours, ending at 10:00, cannot be set. In this case the programmer automatically sets the end of cooking time for 11:00.


Screen Shot 2018-01-04 at 4.37.00 PM.png
  1. On the display AUTO becomes steady and the time appears again. The cooking symbol goes out.

Screen Shot 2018-01-04 at 4.37.30 PM.png

Starting Cooking

  1. The pan symbol lights up. The oven switches on and the cooking cycle set starts.

During Cooking

  1. During the cooking cycle, the display shows the oven temperature measured by the probe or pre-set temperature.
    Press key 2 to display the length of cooking set.
    Press key 3 to display when the cooking will finish.
    The cooking time, end of cooking time and cooking temperature can be varied at any time, as described above.

Screen Shot 2018-01-05 at 9.06.55 AM.png

At the End of Cooking

  1. End appears on the display, AUTO flashes and the audible signal sounds.
    The cooking cycle has finished and the oven is OFF.
  2. Press any push button to stop the audible signal.

Screen Shot 2018-01-05 at 9.08.44 AM.png
  1. OFF appears (oven OFF).
  2. Turn the function selector to 0 (OFF).
  3. The program display shows the time.

Screen Shot 2018-01-05 at 9.10.41 AM.png

At the end of the program always turn the function selector knob to 0 (OFF).

During AUTOMATIC COOKING PROGRAM the oven light is always on, also before starting (heating elements on or cycling) of the programmed cooking.

Cancelling a Set Program

To cancel any program just turn the function selector to 0 (OFF).

If during a set program the function selector is turned to 0 (OFF), Screen Shot 2018-01-05 at 9.26.20 AM.png or Screen Shot 2018-01-05 at 9.28.20 AM.png , the program is cancelled.

Examples of Programming Automatic Cooking

Screen Shot 2018-01-05 at 9.23.18 AM.png

Screen Shot 2018-01-05 at 9.23.59 AM.png


Screen Shot 2018-01-05 at 9.24.39 AM.png


Screen Shot 2018-01-05 at 9.25.10 AM.png

Fig. 5.2

  • Was this article helpful?