Placing the telescopic sliding shelves on the side racks provides EIGHT cooking positions to choose from. Refer to the User guide for suggested shelf positions.
- To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf
- and the sliding frame together), tilt upwards and pull it out of the oven.
- To place a sliding shelf in the oven correctly, position it so that the front bar is toward you, as shown.
- Check that the sliding frame is not extended.
- Check the guard rail (as shown) to make sure the shelf is the right way up.
- Position the shelf so that it is level and the rear shelf tags on both sides of the sliding frame rest on the
- side racks (as shown).
- Then push the sliding shelf all the way to the back of the oven, until the front shelf tags drop into
- For your safety, the wire shelves and telescopic sliding frames are built together as one unit and are not separable.
This means that when placed properly on the side racks, the slides will prevent the wire shelves from tilting
when pulled towards you.
- To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.