Integrated Models Only - Installing the Front Panel

15. Remove bracket from product

WARNING! 

Electrical Shock Hazard Before continuing, ensure that the product is disconnected from the power supply. Failure to follow this warning may result in electrical shock, injury or fire.

16. Attach panel to panel bracket

Use all 14 screws provided as shown.

17. Ground the Panel

WARNING! 

Electrical Shock Hazard To ground (earth) the panel bracket, connect the ground (earth) wire from the product to one of the tabs. Any custom metal component (e.g. handle) that extends past the rubber door seal must be grounded (earthed) too. Failure to follow these warnings may result in electrical shock, injury or fire.

18. Attach panel to product

19.Adjust panel height to align the cabinetry gaps

Integrated models: Ensure that you maintain a minimum of 1⁄16” (2 mm) ventilation gap below the panel.   Designer models: Ensure you maintain a minimum of 5⁄16” (8mm) ventilation gap below the panel.