Skip to main content
Fisher & Paykel Product Help

Controls & Display

 

 

Door

Control Panel - Door.JPG

Control Panel

Control Panel.JPG

 

Indicators Description

Off/On
Opening the drawer will automatically turn the dishwasher on.  
If the dishwasher is in an idle state, touch any button to reactivate it.

1. Wash Program Indicators

If lit:
The wash program has been selected.

2. Lock indicator
If lit:
Keylock or childlock is activated.

3. Wash modifier indicators
If lit:
The wash modifier has been selected. The wash program length and temperature will be modified accordingly.

4. Delay start indicator
If lit:
Delay start is set. The wash program will start after the selected time delay (1-12h)

Wash Program Description
Heavy Heavily soiled pots, pans and dishes.
Medium Dishes that are quite heavily soiled or food soils that have been left to dry overnight.
Eco (default setting) Normally soiled dishes for optimum water and energy usage.
The US/Canada Energy Guide is based on this program.
Fast Lightly soiled dishes.
Delicate Lightly soiled and heat sensitive crockery.
Rinse Prevents odours and soils from drying on dishes.

 

Controls Description

A.  Wash Program Selector Press Forward Button.JPG to scroll through the wash program options.
See above table for program descriptions.
B.  Wash Modifier Selector

Press Wash Modifier Selector.PNG to scroll through the wash modifier options.

Not all modifiers are available for all wash programs.

Keylock
Disables all the buttons (helpful when cleaning the dishwasher).
To activate:
Press and hold Wash Modifier Selector.PNG until you hear a tone. The lock
indicator will light up.
 

Childlock
Disables all the buttons and locks the drawer closed (preventing unauthorised use by children).
To activate:
Press and hold Wash Modifier Selector.PNGuntil you hear two tones. The lock indicator will light up.
To cancel keylock/childlock:
If the drawer is open
Press and hold Wash Modifier Selector.PNG until you hear a tone. The lock indicator will go out.
If the drawer is closed
Press and hold Start_Pause Button.JPG until you hear a tone.  The lock indicator will go out.

C/D.  Start Selector (either on door or inner control panel)

To Start Wash:
Close the drawer and press Start_Pause Button.JPG
OR
Press ► on the control panel before closing the door
To Pause:
Press Start_Pause Button.JPG

  • Wait for three short and one long tone before opening the drawer. Forcing it open mid cycle may cause damage or injury.
  • If the drawer is not restarted within seven minutes it will sound intermittently until it is restarted.


Delay Start
Press and hold ► to set the delay start time. Each tone indicates a 1h delay (up to 12h). The delay start indicator will light up.

  • If you scroll past 12h the dishwasher will exit delay start.  To re-enter delay start follow step 1 above.
  • The wash will start when the delay time is over, provided the drawer is closed.
     

DD24 models only US/CA
If drawer is not closed within 4 seconds of setting delay start, OR If the drawer is opened after delay start has been set (for example, to load more dishes), delay start will be suspended.
To resume:
Press ► and close the drawer OR close the drawer and press Start_Pause Button.JPG.
Cancel wash/delay start
Press and hold or Start_Pause Button.JPG or ►

  • If there is any water in the drawer, it will automatically drain before the dishwasher turns off.

 

 

  • Was this article helpful?