Skip to main content
Fisher & Paykel Product Help

Safety and Warnings

Important please read the following Safety and Warnings.
Electric Shock Hazard.png

Electrical Shock Hazard

Before installing the dishwasher, remove the house fuse or open the circuit breaker. If permanently connecting the dishwasher, be sure the power is isolated and the dishwasher unplugged.

Grounding Instructions

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded.

If the dishwasher is installed as a permanently connected appliance:
GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.
Do not modify the power supply plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an extension cord, adapter plug or multiple outlet box.
Failure to follow this advice may result in electrical shock or death.

Cut Hazard.png

Cut Hazard

Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.

Important Safety Instructions

  • Installation of this dishwasher requires basic mechanical and electrical skills.
  • Be sure to leave these Instructions with the Customer.
  • Installation must comply with your local building, electricity, and plumbing regulations. At the completion of the dishwasher installation, the Installer must perform the Final Checklist.
  • Remove all packaging materials supplied with the dishwasher.
  • This dishwasher is manufactured for indoor use only.
  • Ensure all water connections are turned OFF. It is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Regulations.
  • The dishwasher MUST be installed to allow for future removal from the enclosure if service is required.
  • The switched power outlet must be outside the dishwasher cavity, so that it is accessible after installation.
  • Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to the power supply cord and hoses.
  • If the dishwasher is to be relocated from one installation to another it must be kept upright to avoid damage from water spillage.
  • Make sure only new hoses are used for connection (supplied with the dishwasher). Old hoses should not be reused.
  • Failure to install the dishwasher correctly could invalidate any warranty or liability claims. If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle, boat or mobile facility containing the product to the service shop at your expense or pay the service technician’s travel to the location of the product.
  • This dishdrawer is intended for connection to the hot-water supply.
  • Was this article helpful?