Skip to main content
Fisher & Paykel Product Help

Preference Options

 

Option

Rinse Aid

Water Softener

(Some models only)

Open Drawer Auto Power-On

(Suitable as a Sabbath Option)

Turn Tones Off

Closed Drawer

Autolock

What does it do?

Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash.

Refer to the ‘Water softener’ section of the ‘User guide’ for details.

Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off.

This turns all tones off except for fault alerts.

When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by pressing  (unless Keylock or Childlock is also activated). Useful in boats or motor homes.

 

How to Change the Settings of an Option

1. Check

  • Check that there is no wash underway, press 

2. Enter Menu & Scroll to Option

  • To enter the menu: Press and hold the  and  together for four seconds.
  • You are now in the Rinse aid option of the preference options menu.
    • If you want to change the Rinse aid setting, go to step 3 now.
    • If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press  . To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.

Option

Rinse Aid

Water Softener

(Some models only)

Open Drawer Auto Power-On

(Suitable as a Sabbath Option)

Turn Tones Off

Closed Drawer

Autolock

Which option am I in?

Possible settings

Off to Max (rA5)

Off to Max (Hd5)

On or Off

On or Off

On or Off

Example

setting is 1 

setting is 4 

setting is 1 

setting is 4 

On 

Off 

On 

Off 

On 

Off 

 

3. Change Setting

  • Press  to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press  3 times.

4. Save Setting & Quit Menu

  • Press  . This will save the new setting and quit the preference options menu.
  • Was this article helpful?