Preference Options

Last updated
Save as PDF

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.

Option	Rinse Aid	Water Softener (some models only)	Open Drawer Auto Power-On (suitable as a Sabbath Mode)	Turn Tones Off	Closed Drawer Autolock
What does it do?	Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash.	Refer to the ‘Water softener’ section of the ‘User guide’ for details.	Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off.	This turns all tones off except for fault alerts.	When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by knocking once on the dishwasher door. Useful in boats or motor homes.

Option

Rinse Aid

Water Softener

(some models only)

Open Drawer Auto Power-On

(suitable as a Sabbath Mode)

Turn Tones Off

Closed Drawer Autolock

What does it do?

Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash.

Refer to the ‘Water
softener’ section of the ‘User guide’ for details.

Your dishwasher
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer. You can turn this setting off.

This turns all tones off except for fault alerts.

When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by knocking once on the
dishwasher door. Useful in boats or motor homes.

How to Change the Setting of an Option

1. Check
Check that there is no wash underway, then open the drawer.
2. Enter Menu
To enter the menu: Press and hold the and together for four seconds.

You are now in the Rinse aid option of the preference options menu.
To change the Rinse aid setting, go to step 4 now.

3. Scroll to Option
Press to scroll to the next option. The wash modifier indicators will display which option is selected (see table below).
When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
4. Change Setting
Press to change the setting within an option.
The wash program indicators will display which setting is selected (see table below).
5. Save Setting & Quit Menu
Press ► to save the new setting and quit the preference options menu.

Double models only:
You can use either drawer to change the settings. Changing the settings in one tub will set your preferences for the whole dishwasher.