Parts Supplied - All Models

Last updated
Save as PDF

These are the parts which have been supplied with your Appliance.

Screen Shot 2018-01-08 at 10.12.47 AM.png

Drain hose support (1)

Screen Shot 2018-01-08 at 10.12.58 AM.png

Drain hose joiner (1)

Screen Shot 2018-01-08 at 10.13.16 AM.png

Wire clip (1)
(for securing Drain hose joiner)

Screen Shot 2018-01-08 at 10.13.32 AM.png

Side mounting bracket kit
(A and B) (2)
OPTIONAL

Screen Shot 2018-01-08 at 10.13.50 AM.png

Clamp (1)
(for securing Drain hose joiner)

Screen Shot 2018-01-08 at 10.14.06 AM.png

Phillips
5⁄8” (16 mm) screws (7)

Screen Shot 2018-01-08 at 10.14.18 AM.png

11⁄2” (38 mm) bottom fixing screws & metal washers (2)

Screen Shot 2018-01-08 at 10.14.31 AM.png

Cavity bracket kit (1) supplied with Tall height Designer and
Integrated models only

Screen Shot 2018-01-08 at 10.19.39 AM.png

Moisture protection tape (1)
(to prevent moisture damage)

Screen Shot 2018-01-08 at 10.14.45 AM.png

Cavity bracket kit (1) supplied with Tall height Designer and
Integrated models only

Screen Shot 2018-01-08 at 10.15.07 AM.png

Edge Protector (1)

If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses.

Additional Parts supplied with Integrated Models

Screen Shot 2018-01-08 at 10.21.20 AM.png

External Venting kit (1)

Screen Shot 2018-01-08 at 10.21.55 AM.png

Panel bracket (1)
(attached to product)

Screen Shot 2018-01-05 at 12.11.04 PM.png

Panel mounting screws (6)