Skip to main content
Fisher & Paykel Product Help

Fitting a Custom Toekick Panel

 

 

Custom Toekick Panel.PNG

Toekick Depth.PNG

Depth is measured from FRONT of door panel (assuming thickness ~ 11/16” (18mm) to front face of custom toekick label.

  1. If you require a cutout in your custom toekick panel, choose the most appropriate cutout profile (A or B) depending on the final depth of your toekick panel.

Custom Toekick Panel #1.PNG

  1. Place the Toekick mounting bracket cutting template onto your toekick panel. Ensure they are centered and the template rests on the top surface of the panel.
  2. Secure template to panel either by clamping or using the supplied mounting screws.

Custom Toekick Panel #2_3.PNG

Custom Toekick Panel #4.PNG

  1. After marking the panel, carefully cut or router out the desired profile. Use the template as a cutting guide.
Ensure all bare edges are sealed appropriately.

Custom Toekick Panel #5_6.PNG

  1. Place the Toekick mounting bracket onto your toekick panel. Ensure they are centered and the top of the template aligns with the top surface of the panel.
  2. Secure template to panel using the supplied toekick mounting screws.

Custom Toekick Panel #7.PNG

  1. Slide the toekick onto the mounting rails either side and screw the toekick onto the bottom of tub on either side.
Do not overtighten screw.