Skip to main content
Fisher & Paykel Product Help

Choose Your Installation Method (A) or (B)

 

 

Install Meth A_Frameless Cabinetry.PNG

 

 

Attach Side Mounting Bracket

  • Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. Ensure they’re securely fitted before sliding product into cavity.

Install Meth A_Attach Side Mounting Brackets.PNG

  • The mounting slots are in pairs, one on each side diagonally across the product.  A bracket must match A slot and B bracket must match B slot.
  • When fitting brackets, ensure the ends are not pushed down into the chassis.

 

Pull Through Hoses & Push into the Cavity

Install Meth A_Pull through hoses and push into cavity.PNG

 

Secure to the Cabinetry on the Sides

Install Meth A_Secure to the cabinetry on the sides.PNG

 

Optionally Secure to the Cabinetry Above

Install Meth A_Optionally secure to cabinetry above.PNG

 

After Securing, Refer to 'Fit the Supplied Toekick Panel' Step.

 

 

Alternative Method (B) - Secure by Drawer Removal

Install Meth B_Secure by Drawer Removal.PNG

 

Pull Through Hoses & Push into the Cavity

Install Meth B_Pull through hoses and push into cavity.PNG

 

Remove the Lower Drawer

Install Meth B_Remove Lower Drawer.PNG

 

Secure to the Cabinetry on the Sides

Install Meth B_Secure to the cabinetry on the sides.PNG

 

Optionally Secure to the Cabinetry Above

Install Meth B_Optionally secure to the cabinetry above.PNG

 

 

Refit the Drawer onto the Runners

Install Meth B_Refit the drawer onto the runners.PNG