Skip to main content
Fisher & Paykel Product Help

Product Dimensions

 

 

Prod Dim_Front.PNG

Front

Prod Dim_Profile.PNG

Profile

Prod Dim_Profile.PNG

Plan

 

Product Dimensions

DD24DI - Standard Height Models

Inches (mm)

DD24DTI - Tall Height Models

Inches (mm)

A.  Overall height of product 1, 2 32 5/16 - 34 5/8” (820-880) 34 - 36 3/8” (864-924)
B.  Overall width of product 23 9/16” (599) 23 9/16” (599)
C.  Overall depth of product 3 22 1/2” (571) 22 1/2” (571)
D.  Depth of chassis (to back of front drawer panel) 21 3/4” (553) 21 3/4” (553)
E.  Depth of drawer front panel 5/8” - 13/16” (16-20) 13/16” (20)
F.  Height of chassis 1 31 15/16” (811) 33 11/16” (855)
G.  Height of drawer front panels min. 28 1/4” (717) 29 15/16” (761)
H.  Height of upper drawer front panel min 15 11/16” (398) min. 17 3/8” (442)
I.  Height of lower drawer front panel 12 1/4” - 14 3/16” (311-360) 12 1/4” - 14 3/16” (311-360)
J.  Ventilation gap between drawer front panels 5/16” (8) 5/16” (8)
K.  Height of toekick (customisable) 2 1/4” - 4 5/8” (58-118) 2 1/4” - 4 5/8” (58-118)
L.  Depth from front of drawer panel to front of toekick (adjustable) 4, 5 1 9/16” - 3 15/16” (40-100) 1 9/16” - 3 15/16” (40-100)
M.  Height of leveling feet (adjustable) 2 3/8 - 2 11/16” (9-69) 3/8 - 2 11/16” (9-69)
N.  Maximum extension of drawer 3 21 7/16” (545) 21 7/16” (545)

1 Includes 1/16” (2mm) high bracket slots

2 Depending on adjustment of leveling feet

3 Assuming front panel thickness of 11/16” (18mm)
4 Adjustable to match toekick recess on adjoining cabinetry
5 Assuming custom toekick panel thickness of 11/16” (18mm); if recess is between 1 15/16”-3 5/16” (50-84mm) deep, the panel will need to be cut out - see step ‘Custom panel calculations’

 

 

 

 

  • Was this article helpful?