Parts Supplied

Last updated
Save as PDF

The following parts are supplied for the Installation of this product.

Drain hose support (1)

Screen Shot 2018-01-05 at 12.28.39 PM.png

Drain hose joiner (1)

Screen Shot 2018-01-05 at 12.28.44 PM.png

Wire clip (2) (for securing Drain hose joiner)

Screen Shot 2018-01-05 at 12.28.48 PM.png

Clamp (1) (for securing Drain hose joiner)

Screen Shot 2018-01-05 at 12.28.53 PM.png

Side mounting bracket kit
(A and B) (2) OPTIONAL

Screen Shot 2018-01-05 at 12.28.58 PM.png

Top mounting brackets (2) OPTIONAL

Screen Shot 2018-01-05 at 12.29.02 PM.png

Phillips
5⁄8” (16 mm) screws (9)

Screen Shot 2018-01-05 at 12.29.09 PM.png

Rubber washer for inlet hose (1) (comes already fitted)

Screen Shot 2018-01-05 at 12.29.13 PM.png

Moisture protection tape (1)
(to prevent moisture damage to cabinetry)

Screen Shot 2018-01-05 at 12.29.16 PM.png

Hexagonal socket for feet adjustment (2) (long & short)

Screen Shot 2018-01-05 at 12.29.19 PM.png

Prefinished toekick (1)

Edge Protector (1) (If the services hole is through a metal partition, the hole must be protected with the Edge Protector supplied to prevent damage to the power cord or hoses.)

Screen Shot 2018-01-05 at 12.29.31 PM.png

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11’ 10” (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com