Skip to main content
Fisher & Paykel Product Help

Before you do your first wash

You owe it to yourself and your washer to have your washer installed correctly.

Before you start, it is a good idea to go through the following checklist:

  1. Has the base space packer been removed? Refer to 'Installation Instructions - Unpacking'.
  2. Is the drain hose threaded through the ‘U bend’ (with no more than 20 mm extended) and hooked into your tub or standpipe? Refer to 'Installation Instructions - Drain hose'.
  3. Is the hot hose connected to the Hot valve marked ‘H’? Is the cold hose connected to the Cold valve marked ‘C’? Refer to 'Installation Instructions - Inlet hoses'.
  4. Is the washer correctly levelled, feet are extended and cabinet corners are clear of the floor? Refer to 'Installation Instructions - Levelling instructions'.
  5. Have you performed the installation test cycle? Refer to 'Installation Instructions - Installation test cycke'.

CleanSmart™ washer capacity

CleanSmart™ washer offers a generous 8 kg capacity. The list below outlines what is included in a 8 kg wash load (in accordance with AS/NZS 2040.1:2005).

Wash Load

8 kg

Sheets (double)

3

Bath towels

4

Tablecloths

3

Shirts

5

T-Shirts

5

Pillowcases

5

Shorts

5

Washcloths

8

Handkerchiefs

6

The above load composition is indicative only. We recommend for everyday use that you separate out your sheets and towels and wash them on the cycles specifically designed for them.

The ‘Regular’ cycle, with ‘High Efficiency On’, ‘Warm/Cold’ wash temp, ‘Normal’ soil level, ‘1100’ spin speed and ‘Eco Rinse’ option selected, is the recommended water and energy saving cycle for normally soiled, everyday washing.

  • Was this article helpful?