Getting started quickly
WH8560F and WH8060F models only
|
|
Fabric softener should not be used if you have selected the ‘Super Quick’ cycle.
WH8560F and WH8060F models
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch
to start the cycle.
- If you make an invalid selection the washer will beep at you.
- When the cycle finishes, your washer will perform end of cycle beeps to alert you and then turn off automatically.
- If you wish to stop your washer at any point during a cycle, simply touch to
pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the
button then select the new cycle. Touch
to restart the washer.
For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.
WH8560P, WH8060P and WH7560P models only
|
|
Fabric softener should not be used if you have selected the ‘Quick’ or ‘Super Quick’ cycles.
WH8560P, WH8060P and WH7560P models
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch
to start the cycle.
- If you make an invalid selection the washer will beep to alert you.
- When the cycle finishes, your washer will perform end of cycle beeps and then turn off automatically.
- If you wish to stop your washer at any point during a cycle simply touch
to pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the
button then select the new cycle. Touch
to restart the washer.
For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.
WH8560J and WH7560J models only
|
![]() Detergent in compartment marked 2 ![]() Fabric softener in compartment marked ![]() |
WH8560J and WH7560J models
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch
to start the cycle.
- If you make an invalid selection the washer will beep to alert you.
- When the cycle finishes, your washer will perform end of cycle beeps and then turn off automatically.
- If you wish to stop your washer at any point during a cycle simply touch
to pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the
button then select the new cycle. Touch
to restart the washer.
For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.