Skip to main content
Fisher & Paykel Product Help

Levelling the Machine

  1. Before positioning the machine in its final position, check that the machine is level, front to back and side to side.

  2. Manoeuvre the product into its final position (we suggest a minimum clearance of 20 mm each side)

  3. Use a spirit level to check that the machine is correctly level. If needed, pull the machine out. Loosen the lock nut using the spanner provided and wind the feet up or down to correctly level the machine.

  4. Using the spanner provided tighten the lock nuts against the base of the machine to lock the feet in position.

  • Was this article helpful?