Skip to main content
Fisher & Paykel Product Help

Customising wash cycles

After using your washer a few times you may discover there are some wash options you prefer for some cycles.

You can programme your washer to remember the wash options you prefer for each wash cycle. For instance, you may want to set the ‘Easy Iron’ cycle to cold wash temperature or set the ‘Everyday’ cycle so it gives you Rinse+ every cycle.

To customise a cycle:

  1. Press ‘POWER’ to turn the machine on.
  2. Turn the dial to select the cycle you wish to customise.
  3. Touch and hold any of the wash option buttons for 3 seconds. The cycle icon will flash on and off to indicate that the product is in cycle adjustment mode. The display will show set.png.
  4. Select the wash options you prefer by touching the relevant option button.
  5. Touch lock.png to save the selected settings.

Your washer will automatically remember your changes for all future washes you do on this cycle.

Factory Reset

You can reset your washer to the default settings it left the factory with:

  1. Turn the dial to select ‘Spin’.
  2. Touch and hold the ‘Delay Start’ ‘More’ plus.png , the ‘Delay Start’ ‘Less’ minus.png and ‘Options’ buttons together for 3 seconds def.png will appear on the screen and the machine will beep.
  3. Your washer will now be reset to the default settings.
  • Was this article helpful?