Skip to main content
Fisher & Paykel Product Help

Testing the Installation

Check the operation of the machine using the following procedure:
  1. Press ‘POWER’ and turn dial to ‘Quick’ or ‘Super Quick’, then touch .
    Check that the hoses are not leaking at the machine and tap end, while waiting until you see water appear in the drum.

  2. Touch  then press ‘POWER’ to stop the cycle and turn the machine off.

  3. Press ‘POWER’ again, turn the dial to ‘Spin’ and touch .

  4. Check the outlet hose is firmly secured in a standpipe or tub, or to a spigot and the machine pumps out and spins.


  • Was this article helpful?