Skip to main content
Fisher & Paykel Product Help

Dryer controls

Provides information on the Digital display screen, time to go, progress lights, and keylock.

Digital display screen

The digital display screen provides feedback on how long the drying cycle has to go. If you have programmed a ‘Delay Start’ (DE7060M and DE5060M models only), the screen will display the time remaining before the cycle starts, along with any messages to help you with the overall running of your dryer (eg user warnings).

Screen Shot 2017-06-26 at 10.52.58 AM.png

Digital display screen

Time to go

If you have selected one of the Time Dry cycles your dryer displays approximately how many minutes the cycle has remaining. The word Screen Shot 2017-06-26 at 10.53.32 AM.png is displayed on the screen for automatic cycles.

Please be aware that a number of factors can influence the overall cycle time, eg the fabric type and construction of garment, load size, how wet the load is, etc.

Screen Shot 2017-06-26 at 10.53.06 AM.png

Time to go

Progress lights

The progress lights indicate what stage of the cycle the dryer is currently at (‘Damp’, ‘Dry’ or ‘Cooling’). All three lights are on at the beginning of the cycle. The light for the current stage of the cycle flashes, and each one goes out when that stage of the cycle is complete.

Screen Shot 2017-06-26 at 10.53.13 AM.png

Progress lights


Keylock can be used to lock the buttons on your dryer. This will avoid accidental button presses. For more detail please refer to the 'Drying cycle options' section.

Screen Shot 2017-06-26 at 10.53.19 AM.png

Keylock mode

  • Was this article helpful?