Skip to main content
Fisher & Paykel Product Help

Getting started quickly


  • Check the lint filter is clean before every load. Ensure it is replaced correctly before using your dryer.
  • The lint filter indicator light will be on at the beginning of every cycle as a reminder to check the lint filter.
  • Sort and load items into the dryer drum, ensuring no items are in the way of the door. Close the door.
  1. Press ‘Power’ to activate your dryer.
  2. Your dryer will default to the ‘Everyday’ cycle. Select your desired drying cycle by turning the SmartTouch™ Control Dial (DE6060P only) or gently touching the cycle button of your choice.
  3. Select your preferred drying options, using the SmartTouch™ buttons on the right hand side of the panel (if you wish to select options different from the default options for the cycle).
  4.  Touch the Screen Shot 2017-06-23 at 3.11.16 PM.png button to start the cycle.





  • If you make an invalid selection the dryer will beep to alert you.
  • When the cycle finishes, your dryer will beep and then turn off automatically. If the ‘Wrinkle Free’ option has been selected the dryer will rotate the drum periodically blowing cool air into the drum to help minimise wrinkling and creasing of your load.
  • If you wish to change a cycle once a drying cycle has started, touch the 2017-07-18_0948.png button then select the new cycle. Touch 2017-07-18_0948.png to restart the dryer with the new cycle. This may affect drying performance.
  • If you wish to stop the dryer before the cycle has finished you MUST remove the clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or bunched up in a clothes basket. Take extreme care as the drum and the load items may be extremely hot.

  • Failure to follow the advice in this guide may result in damage to your garments and your expectations of drying performance may not be met.

Screen Shot 2017-06-23 at 3.19.40 PM.png

Screen Shot 2017-06-23 at 3.20.25 PM.png

  • Was this article helpful?