|Possible Cause||What to Do|
|Keylock turned on||Turn off Keylock as per 'Wash Cycle Options' in your User Guide as this function locks the controls|
|Dryer door open||Make sure the door is fully closed before starting.|
|'Star/Pause' not touched firmly enough||Touch the 'Start/Pause' again.|
|Dryer is paused||'Start/Pause' light will be flashing. Touch the 'Start/Pause' button resume the cycle.|
|Is the dryer displaying a user warning or fault code?||Refer 'Fault Codes' in your User Guide.|
|Water tank full or not properly in place||Empty the water tank refer to 'Caring for your Dryer' or 'Emptying the Water Collection Tank' in your User Guide. Ensure the water tank is properly in place.|
|Lint filter needs to be emptied||Empty the lint filter after every cycle and ensure it is correctly in place.|
|Dryer is overloaded||Remove some items from the dryer|
|‘Delay Start’ function is set||Refer to 'Drying Cycle Options' in your User Guide, for more information.|
|Control panel is “asleep”||This is normal. Press ‘POWER’ to activate the control panel.|
|Dryer is unplugged||Make sure the dryer plug is pushed completely into the outlet.|
|Fuse is blown/circuit breaker is tripped||
Check the building’s fuse/circuit breaker box and replace fuse or reset breaker.
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us