Operating instructions

Last updated
Save as PDF

Introduces temperature control, door alarms, and fault alarms for vertical freezers.

Models:	525 mm wide	E150, E210
Models:	635 mm wide	E308, E388

Temperature control

The cabinet control is located at the bottom rear of the cabinet.
The control has been factory set to position 4 for normal operating conditions.
The freezer temperature should be approximately -18°C.
Re-adjust the control as necessary to suit your individual preference.

1 is the warmest setting.

7 is the coldest setting.

Fig.13 Control box

Door alarms

If the door is left open the alarm will beep after 60 seconds.
If the door remains open, subsequent beeps will sound every 30 seconds for 5 minutes.
A continuous alarm will sound if the door has been left open for 5 minutes or longer.
The alarm will stop when the door is closed.

Fault alarms

If the electronic controller detects a fault from which it is unable to recover, an alarm will sound when the door is opened.
When the door is opened and a fault has occurred, a specific number of beeps will sound. If a fault occurs, call your Fisher & Paykel Authorised Repairer immediately; the number of beeps will help the service person find and remedy the cause of failure.