Flushing the water filter
Once connected to the water supply, run at least 10 L / 10 qt of water through the filter before connecting water line to the fridge.
Check for leaks
After connecting water line to the fridge check that all connections are dry and free of drips. If not, please alert the plumber
Filling the water reservoir
Push a jug against the dispensing pad until water is continuously dispensed (approximately one minute). Dispense at least 3 L / 3 qt of water, stopping intermittently. Failure to do this will result in excessive dripping from your dispenser.
Press and hold , and together for 4 seconds then close the door(s). The ice tray will flip. Force another cycle. The ice tray will flip and spill the water into the ice bin. Empty water and replace bin.
Ice tray will flip once refrigerator doors are closed.
Press the button twice to alternate from the fresh food to the freezer compartment. Turn special functions on and then off.
Please note that once installation is complete a few drips may appear out of the dispenser over the next few days as the remaining trapped air is cleared.