Using your water dispenser (Ice & Water models)

Last updated
Save as PDF

Ensure your ice and water system has been correctly installed by following the ‘Installation instructions’ section before using your water dispenser.

Dispensing

Your water dispenser has been designed for one-handed operation.

To dispense water push the dispensing pad gently, using a glass or container. This pad requires only a gentle press to activate.
To stop the flow of water, simply pull your glass away from the dispensing pad.

Water dispenser

Please remember that pressing very hard against the dispensing pad will not encourage the dispenser to operate faster or produce greater quantities of water.

To avoid damage to property or personal injury do not put hands, fingers or objects up the dispenser opening.

Once installation is complete a few drips may appear out of the dispenser over the next few days as the remaining trapped air is cleared.

Dispenser Lock

The DISPENSER LOCK prevents water from being dispensed. This is useful when you are cleaning the external display or when there are small children around.

Press and hold the button for 4 seconds to activate DISPENSER LOCK.
The light above the DISPENSER LOCK icon will be illuminated.
Pressing the water dispenser pad will cause a raspberry sound indicating to the user that water cannot be dispensed.
To de-activate the DISPENSER LOCK, press and hold the button for 4 seconds. The light above the DISPENSER LOCK icon will no longer be illuminated and water dispensing will be enabled.

dispenser lock diagram.png

Dispenser Lock