Cleaning & Caring for Your Refrigerator

Exterior (all models)

Other Exterior Surfaces (all models)

• Clean all other exterior surfaces with a mix of warm water and liquid dishwashing detergent, and a soft cloth.
• If necessary, clean the magnetic door gasket, the centre door gasket and the pocket handles with an old toothbrush, warm water and liquid dishwashing detergent.

Electric Shock Hazard. Do not remove rear compartment cover. This may expose you to the risk of an electric shock.

Interior (all models)

• It is important to keep the interior of the refrigerator and freezer clean to help prevent food from becoming contaminated during storage.
• The amount and types of food stored determines how often cleaning should be carried out in the refrigerator (ideally once every 1 to 2 weeks).
• Remove the shelves from cabinet and door. Wash shelves and storage bins in warm water and detergent; rinse in clean water and dry before replacing.
• Wipe over the interior surfaces with warm water and liquid dishwashing detergent. Alternatively you can use 1tsp baking soda dissolved in 500ml of warm water. Rinse with clean water.
• To help remove “old stale refrigerator” smells add a few drops of vanilla essence or vinegar to the water before cleaning.
• Clean interior surfaces with warm water and liquid dishwashing detergent. Use a toothbrush for the magnetic door gasket.
• Do not use harsh, abrasive cloths on any part of the refrigerator or freezer.

Glass Shelves (all models)

Clean with warm water and detergent or a glass cleaner.

Bottle Holder (where fitted)

Clean with warm water and detergent. The use of abrasive cleaners and solvents may cause damage.

Automatic Ice Dispenser (Ice & Water and Automatic Ice models only)

• We do not recommend you clean the ice maker componentry, but it is important to clean the bins occasionally.
• The storage bin should be cleaned regularly and the old ice in the bottom of the bin discarded.
• Wash bin in lukewarm water. Dry thoroughly and replace.
• When replacing the bin ensure that the scoop is on the right hand side or at the front of the bin (model dependent).

Many commercially available cleaning products contain solvents that may attack the plastic components of your refrigerator and cause them to crack. It is important to use only warm water and a small amount of liquid dishwashing detergent on any components inside and outside your refrigerator. Avoid using anti-bacterial cleaning products on either the interior or exterior of the cabinet as they may cause rusting of metal components and cracking of plastic components.

Humidity Control System

When cleaning the shelf above the vegetable bins, we recommend that you do not disassemble the Humidity Control System from the shelf. In the event that the humidity control lid (plastic lid) and humidity slides become separated from the glass shelf, follow these instructions to reassemble. Turn shelf upside down. To attach humidity slides onto shelf front corners, fit bottom clips into shelf front trim. Next, slide sideways towards shelf until arm clips onto glass. To attach humidity control lid — with text facing you, align lid with front of shelf. Hold lid vertically and fit front end into retainer on shelf. Ensure lid fits into retainer as well as underneath humidity slides. At the sides of the shelf, adjust humidity slide tabs so that the plastic lid is between the shelf and the tabs. If clips on back of shelf are present, fasten lid with rear clips. Ensure that the cover is fully secure at front and back of shelf.       To Remove Trays or Fixed Bins For ease of removal, empty food from tray/bin first. Hold the centre front of the tray/bin handle. Lift vertically to unclip from the runners and pull tray/bin towards you to remove. Push both runners back into refrigerator	Humidity Slides
	Humidity Control System cleaning
	Tray removal

Ensure that trays and bins are securely clipped onto the runners before use. Bin and tray runners are pre-lubricated, and will not need to be re-lubricated during their life. Do not attempt to clean grease from the runners, as this will affect their ability to function. Do not immerse runners in water.