Skip to main content
Fisher & Paykel Product Help

Operating instructions

Introduces temperature control, door alarms, and fault alarms for vertical freezers.
Models: 525 mm wide E150, E210
635 mm wide E308, E388

Temperature control 

  • The cabinet control is located at the bottom rear of the cabinet.
  • The control has been factory set to position 4 for normal operating conditions.
  • The freezer temperature should be approximately -18°C.
  • Re-adjust the control as necessary to suit your individual preference.

1 is the warmest setting.

7 is the coldest setting.

Fig.13 Control box

Door alarms

  • If the door is left open the alarm will beep after 60 seconds.
  • If the door remains open, subsequent beeps will sound every 30 seconds for 5 minutes.
  • A continuous alarm will sound if the door has been left open for 5 minutes or longer.
  • The alarm will stop when the door is closed.

Fault alarms

  • If the electronic controller detects a fault from which it is unable to recover, an alarm will sound when the door is opened.
  • When the door is opened and a fault has occurred, a specific number of beeps will sound. If a fault occurs, call your Fisher & Paykel Authorised Repairer immediately; the number of beeps will help the service person find and remedy the cause of failure.
  • Was this article helpful?