Skip to main content
Fisher & Paykel Product Help

Door Clearance

 

 

Door Clearance_115.PNG Door Clearance_90.PNG

For 90° door swing a hinge limiting bolt is supplied with your product. This pin fits in the boreholes of the top hinge (Z).

Before opening the doors, ensure that the product is stable. Follow these steps to avoid risks that can cause serious injury or death.
  1. Open door to 90°.
  2. Align the hinge limiting bolt vertically with the bore hole.
  3. Insert the pin through the bore hole. Use a hammer to drive the pin through the hole.

 

Door Clearance Dimensions

RS46

mm

RS61

mm

RS76

mm

A. Depth of door (90° open) measured from front of door

508

660

813

B. Minimum door clearance* to adjacent wall** (115° — full internal access)

292

356

419

C. Minimum door clearance* to adjacent wall** (90° — reduced internal access)

110

110

110

* Measured from front cabinetry edge.
** Does not include the Custom door panels or handles to be manufactured and fitted by a cabinetmaker.

 

 

 

  • Was this article helpful?