Skip to main content
Fisher & Paykel Product Help

Installing Water Filter Cartridge (Ice & Water Models Only)


The water filter head must be firmly pushed into the product and secured, incorrect installation can lead to water leaks.


  1. Remove the red protective cap on the spigot head


  1. Pull freezer drawer slightly open to fit filter cartridge tool.

    Align the filter cartridge tool over the filter. Insert the filter cartridge and tool into the bottom left of the product, firmly push the cartridge in until the filter head cannot be pushed any further.


  1. Turn 90° clockwise to tighten. Remove filter cartridge tool and close freezer drawer.


  1. Filter cartridge shown in the locked position.
  • Was this article helpful?