Levelling your Appliance

It is important that all four corners of the product is supported firmly onto the floor to eliminate any movement.
Installing the appliance on a soft or uneven/unlevelled floor may result in twisting of the product and poor door sealing.
Raise the product using an 11 mm hex socket or 4 mm hex Allen key. One turn of height adjusting nuts is equivalent to 1 mm height travel.

Maximum travel 20 mm.

Raise the front of the product until the fixing brackets contact the ceiling of the enclosure (refer to B).

Turn clockwise to raise roller or counter-clockwise to lower roller.

Repeat on opposite side.
Raise the rear of the product until the refrigerator doors are flush with the front face of adjacent walls. Turn clockwise to raise roller or counter-clockwise to lower roller.

Repeat on the opposite side.

Gently push the front of the product to check the stability and to ensure side gaps are even with enclosure.