Installing your Appliance
- Your product is fitted with front and rear rollers designed for moving the product in the forwards and backwards direction.
- Avoid moving the product in a sideways direction as this may damage the rollers or the floor covering/surface.
-
Adhere power cord clip to the appliance rear. Connect the appliance to a power supply and turn on.
-
Ensure excess power cord length is secured onto the clip.
-
Gently push the appliance into the enclosure. Take care not to roll over or damage power cord and/or water tubing.
Ensure water tubing is routed away from any sharp objects, sharp corners (beware of kinking the tube as this will stop water flow), and not in
a location where it can be kinked or squashed.
-
Ensure a firm contact is observed as the appliance engages the anti-tip bracket
(60 mm min. overlap).
-
Centre the appliance within the alcove, using the adjacent walls as a guide.
