Product & Cavity Dimensions without Door Panels

Last updated
Save as PDF

Details the various product and cavity dimensions of your fridge without door panels.

Front View

Profile View

Top View

Shown with custom door panels attached to fridge

Cavity Dimensions

RS90A model shown only.
When designing custom door panels, these are only available for non-Ice & Water models.

Property (mm)	RS90A
Overall height of cavity	1800
Overall width of cavity when adjoining cabinetry can share 4 mm door gap when adjoining cabinetry cannot share 4 mm door gap	900 904
Overall depth of cavity	650

Property (mm)

RS90A

Overall height of cavity

1800

Overall width of cavity

when adjoining cabinetry can share 4 mm door gap
when adjoining cabinetry cannot share 4 mm door gap

900
904

Overall depth of cavity

650

Total front panel width with required gaps at sides = 904 mm ( product width + 2 x cabinetry gaps).
For flush cabinet situation where the gap cannot be shared between the fridge and adjoining cabinet, make the cavity width 904 mm and open totally within itself.

Product Dimensions

Property (mm)	RS90A
Overall height of product*	1798
Overall width of product	890
Minimum cabinetry gap clearance from edge of custom product***	4
Overall depth of product (excluding front door panels)	606
Depth of toe-kick (measured from front of door panels)***	50
Height of grill/toekick*	100
Depth of product front panels (excludes handles)***	18

* Includes mounted feet and top brackets.
** For custom door panel dimensions refer to 'Custom door panel dimensions' page.
*** Door panels to be manufactured and fitted by cabinetmaker, max. thickness 18mm.

115° Door Opening (Full Rotation)

90° Door Opening

Door Clearance Dimensions

Property (mm)	RS90A
Depth of door (widest opening) measured from front of cabinetry	445
Depth of drawer (open) measured from front of cabinetry*	338
Minimum door clearance** to adjacent wall (115° – full internal access)*	300
Minimum door clearance** to adjacent wall (90° – reduced internal access)*	100

* Does not include the custom door panels or handles to be manufactured and fitted by cabinetmaker.
** Measured from front cabinetry edge, includes 2 mm cabinetry gap.