Skip to main content
Fisher & Paykel Product Help

Induction cooktop introduction


 

Screen_Shot_2017-06-26_at_1.14.37_PM-fixed.png
Fig. 22 Cooktop layout

  1. 2300 W (3000 W *) zone
  2. 1400 W zone
  3. Cooking zones display
Note-Icon.png

* Maximum power output when set for PowerBoost (see section ‘Using your cooktop’s special features’)

Important-Icon.png Disconnect the appliance from the mains if the ceramic glass is cracked and contact Customer Care. Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop surface since they can get hot.

Cooking zones display

The ceramic cooktop is fitted with induction cooking zones. These circular zones are controlled by separate dials positioned on the control panel below.

At the front, is the display for the cooking zones (one for each zone). Each zone display is activated by it’s corresonding control dial and displays:

Screen_Shot_2017-06-26_at_1.16.16_PM-fixed.png
Fig. 23 Cooking zones display

 


Screen Shot 2017-06-26 at 1.18.33 PM.png

= Cooking zone Off (not activated)


Screen Shot 2017-06-26 at 1.18.44 PM.png

= Cooking zone On (activated but not operating). If all the zones are in zero setting, the display switches off automatically (cooking zones Off) after about 10 seconds.

Screen Shot 2017-06-26 at 1.18.51 PM.png - Screen Shot 2017-06-26 at 1.18.59 PM.png

= Power levels

Screen Shot 2017-06-26 at 1.20.29 PM.png

= Auto Heat-reduce feature

Screen Shot 2017-06-26 at 1.20.38 PM.png

= PowerBoost feature

Screen Shot 2017-06-26 at 1.20.45 PM.png

= Hot Surface indicator

Screen Shot 2017-06-26 at 1.20.52 PM.png

= Pan detection indicator

Screen Shot 2017-06-26 at 1.20.59 PM.png

= Childlock

Note-Icon.png Each lit figure refers to the relevant cooking zone
  • Was this article helpful?