Skip to main content
Fisher & Paykel Product Help

Using your induction cooktop

Control dials

Each cooking zone is activated by a separate control dial positioned on the control panel. The functions are arranged on the actual dial itself.

If a cooking zone is not turned off (‘0’ position) the electronic system automatically switches it off after a pre-set time ranging from 90 minutes to 6 hours, depending on the power setting.

Fig 22 Control dial - rear left & front right zone

Fig 23 Control dial - front left & rear right zone

Power level

Turn the dial clockwise to set the desired power level between 1 (minimum) and 9 (maximum). The power level can be modified at any time by turning the dial clockwise or anti-clockwise to a different setting.
The cooking zone display shows the selected level.

Hot Surface Indicator

When the temperature of a cooking zone is still hot, the relevant Hot Surface indicator  lights up on the display to alert you of the hot surface. Avoid touching the cooktop surface over the cooking area. Please pay special attention to children. When the  is lit on the display, it is still possible to start cooking again; just turn the control dial to the required power level. The indicator will disappear when the surface has cooled down to a safe temperature.

Childlock

When not using the induction cooktop, set the Childlock to prevent children from accidentally switching on the cooking zones.
Ensure all cooking zones are switched Off (‘0’ position), then turn the control dials of the left cooking zones simultaneously to the left (‘A’ setting) and hold the dials in this position until lights up on the cooking zones display; then release the dials.
To deactivate the childlock repeat the same procedure until the  goes out; then release the dials.

  • Was this article helpful?