Skip to main content
Fisher & Paykel Product Help

Setting the clock

Introduces how to set and make changes to the clock.
To set the clock

When the power to the appliance is turned on or restored after a power failure Screen Shot 2017-06-19 at 4.03.19 PM.png will flash in the display.

  1. Press Screen Shot 2017-06-19 at 3.36.18 PM.png  and Screen Shot 2017-06-19 at 3.36.35 PM.png together - the display will stop flashing. The clock is now set for Screen Shot 2017-06-19 at 4.03.19 PM.png
  2. Press Screen Shot 2017-06-19 at 3.36.18 PM.png and Screen Shot 2017-06-19 at 3.36.35 PM.png together again to change the time. The display will flash

  3. Press Screen Shot 2017-06-19 at 3.37.24 PM.png and Screen Shot 2017-06-19 at 3.37.37 PM.png to set the time. After a few minutes the display will be steadily lit, showing the time is set.

To change the time
  1. Press Screen Shot 2017-06-19 at 3.36.18 PM.png and Screen Shot 2017-06-19 at 3.36.35 PM.png together. The display will flash.

  2. Press Screen Shot 2017-06-19 at 3.37.24 PM.png and Screen Shot 2017-06-19 at 3.37.37 PM.png to set the time.

After a few seconds the display will remain steadily lit, showing the time is set.

  • Was this article helpful?