Skip to main content
Fisher & Paykel Product Help

Using your induction cooktop

CI604CTB model

CI704CTB model

CI804CTB model

CI904CTB model

Cooking Zone

Zone Diameter

Power

Powerboost

Recommended Minimum Pan Size

1

200 mm

2300 W

3000 W *

145 mm

2

160 mm

1200 W

1400 W *

110 mm

* Maximum output when set on PowerBoost.

Touch controls overview 

These indicators show which cooking zone(s) the timer is set for:

 

To select a setting on the selector:

Touch at one point to “jump” to a specific setting

OR

slide your finger along the selector.

 

To start cooking

  1. Touch and hold the ON/OFF control for 2 seconds.
  • a red indicator light will glow.

  1.  will appear in the cooking zone displays.

  1. Place a suitable pan on the cooking zone you wish to use.
  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.

Always place small pans in the centre of the cooking zone.

  1. Touch the display of the cooking zone you wish to use.

  1. Select a heat setting by touching or sliding the setting selector with your finger.
  • The setting will appear in the display of the selected cooking zone.
  • If you don’t choose a heat setting within 20 seconds, the cooktop will automatically turn off. Start with step 1 again.

  1. You can modify the heat setting at any time during cooking.
  • Touch the display of the cooking zone you wish to adjust.
  • Adjust the heat setting by touching or sliding the setting selector with your finger.
  • The new heat setting will appear in the display of the selected cooking zone.

If a display flashes  alternately with the heat setting 

This means that:

  • you have not placed a pan on the correct cooking zone or
  • the pan you’re using is not suitable for induction cooking or
  • the pan is too small or not properly centred on the cooking zone.
  • No heating takes place unless there is a suitable pan on the cooking zone.
  • The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.

When you have finished cooking

To turn off an individual cooking zone, but continue to use other cooking zones

  1. To turn off an individual cooking zone
    Select the cooking zone you want to turn off.

  1. Decrease its heat setting until the display shows . If the cooking zone surface is too hot to touch,  will replace  in the display.

To turn the whole cooktop off


Turn the whole cooktop off by touch and holding the ON/OFF control.



 

Beware of hot surfaces

 will appear in the display of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature.

Locking the controls

  • You can lock the controls to prevent unintended use
    (for example children accidentally turning cooking zones on).
  • When the controls are locked, all controls except the ON/OFF control are disabled.

To lock the controls

  1. Make sure that the cooktop is turned on but no cooking zone is in use.
  2. Touch and hold the keylock control for a few seconds. The indicator light above the control comes on, indicating that the controls are locked.

The cooktop will automatically turn off after 20 seconds, but the controls will still be locked when you turn the cooktop on again.

If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator light will flash and the cooktop will remain locked.

To unlock the controls

  1. Make sure the cooktop is turned on.
  2. Touch and hold the keylock control  for a few seconds. The indicator light above the control goes out.
  3. You can now start using your cooktop.

Do not lock the controls while a cooking zone is in use. If you do, you can always turn the cooktop off with the ON/OFF control in an emergency.

  • Was this article helpful?