Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Details the various parts supplied with your cooktop.

Clamping brackets (4)
and screws (4)

CI302CTB only
Clamping brackets (2)
and screws (2)


Foam tape (1)

Installing multiple products

We recommend installing products in separate cutouts with a minimum distance of 5 mm between the glass edges.

  • If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
  • The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website www.fisherpaykel.com.
  • If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance.
  • Was this article helpful?