Flush Mounting Installation (Not Recommended)

Last updated
Save as PDF

We do not recommend flush mounting and sealing as servicing requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop. The owner must ensure the cooktop has been cut out from the benchtop before servicing can be carried out. Fisher & Paykel will not be liable for any costs associated with removing or replacing a flush-mounted and/or sealed-in product, nor for repairing any damage that may be incurred by doing this.

Electrical connection is made at the right rear

Property (mm)	CI302DTB	CI603DTB	CI604DTB	CI754DTB	CI905DTB
Overall height of product (including terminal block below top of chassis)	54	54	54	54	54
Overall width of product	300	600	600	750	900
Overall depth of product	530	530	530	530	530
Height of chassis (including terminal block below top of chassis)	49	49	49	49	49
Width of chassis	257	549	549	719	855
Depth of chassis	478	478	478	478	482
Overall width of routered recess	305	605	605	755	905
Overall width of cutout	265	560	560	725	870
Overall depth of routered recess	535	535	535	535	535
Overall depth of cutout	490	490	490	490	494
Corner radius of cutout	max. 10	max. 10	max. 10	max. 10	max. 10
Corner radius of routered recess	max. 2	max. 2	max. 2	max. 2	max. 2
Height of routed recess	5	5	5	5	5
*Minimum clearance below top of benchtop to: rear top of oven installed below cooktop or cabinetry thermal protection barrier**	70	70	70	70	70