Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Lists and illustrates the various parts supplied with your cooktop.

Dual Wok Pan support (Models with a Dual Wok only)

Pan support (not supplied with Dual Wok only models)

Mini wok Pan support (1) (CG604D only)

Small pan support (1) (some models only)

Wok stand (1)

Fibre washer (1)

Elbow 1/2“ BSP external thread (1)

Clamping brackets (4) and screws

LPG test point adaptor (1)
(LPG models only)

NG regulator (1) (NG models only)

Installing multiple products

We recommend installing multiple products in separate cutouts, with a minimum 5mm space between the glass edges of the adjacent products. If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.

The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.

If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance. 

  • Was this article helpful?