Parts Supplied
|
Dual Wok Pan support (Models with a Dual Wok only) |
Pan support (not supplied with Dual Wok only models) |
Mini wok Pan support (1) (CG604D only) |
Small pan support (1) (some models only) |
Wok stand (1) |
|
Fibre washer (1) |
Elbow 1/2“ BSP external thread (1) |
Clamping brackets (4) and screws |
ULPG test point adaptor (1) |
NG regulator (1) (NG models only) |
Installing Multiple Products
We recommend installing multiple products in separate cutouts, with a minimum 5mm space between the glass edges of the adjacent products. If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance.